-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…
-
@jmigliori Here are the batch of next 100 page instances, continuing #15
-
##### ISSUE TYPE
Installation error (when processing a playbook)
##### SUMMARY
Playbook launch fails
##### ENVIRONMENT
* AWX version: 11.0.0
* AWX install method: Kuberenetes (kubespray)
* …
-
## Goal
Create a home page for Guest visitors. This page will be composed of cards representing a news. The card interface is described below.
A card could be:
- Fetched form the [K-Fêt Facebook…
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…