-
Hello everyone! I am now trying to simulate CSRNG and ENTROPY_SOURCE , but I meet two issues when I used the testbench which had provided in src to simulate them.
1. For CSRNG, it has the issue "c…
diswd updated
3 weeks ago
-
I am using the most recent version of OpenWRT (21.02.1)
```
root@OpenWrt:~# opkg list | grep ath10k
ath10k-board-qca4019 - 20201118-3
ath10k-firmware-qca4019-ct - 2020-11-08-1
kmod-ath10k-ct -…
-
I finally got my CrossLink-NX evaluation board (with a LICFL-40-8BG400C) and I put together a PCIe x1 to SMA board (https://github.com/teknoman117/PCIEX1-SMA) which I'm currently waiting on to arrive …
-
Please provide this info. See this link for more info on how to gather debug
info: http://www.candelatech.com/ath10k-bugs.php
Description of the problem (how to configure, how to reproduce, how of…
-
### Describe the bug
Sometimes will see a kernel warning in `dmesg` related to the wireless driver:
```
WARNING: CPU: 3 PID: 1309 at backports-6.1.24/net/mac80211/driver-ops.h:611 0xbf4963ac [ma…
-
We have two routers:
- [NDS-The-TARDIS](https://hannover.freifunk.net/karte/#/en/map/7cff4de525e1)
- AVM FRITZ!Box 4040
- Uplink-Router
- [vH31](https://hannover.freifunk.net/wiki/Fr…
-
Hi, i'm trying to program an LPC1766 mcu, flashing it with a J-Link programmer, but i always receive a **"Writing target memory failed"** error from flash process (platformio run --target upload). My …
-
Hello and thank you for writing!
In general, supporting a different development board is not too complex, but there are three requirements:
1. The FPGA (programming logic) must have direct access …
-
Currently we do not own any of the supported platforms but we are interested in adding ESP to our workflow. We do have other FPGA boards we would like to use.
I was wondering how easy would it be t…
-
For some curious reason, after flashing several openmote-b nodes with a J-Link programmer, trying to reboot said nodes via the shell "reboot" command causes those nodes to hang forever. I verified tha…