-
Hello,
I installed the bluerov2 simulator as you suggested in the installation guide but I'm confused on how to launch the PID Controller.
My goal is to give the robot a XYZ coordinate + orientat…
-
When launching the bluerov2 node by doing:
`roslaunch bluerov_ros_playground bluerov2_node.launch`(there's a mistake in the README, where bluerov_node is called)
The following text appears in the …
-
Hi,recently,i am using the bluerov2.I want to run the orbslam2 using the camera of the bluerov2. And,when i used the camera,i can not found the message for ROS topic "camera_info",so that the camera c…
-
show:no SYS_STATUS data
no SERVO_OUTPUT_RAW data
no ATTITUDE data
no LOCAL_POSITION_NED data
-
I have QGroundControl ( v4.0.5 ) installed on my Mac ( version 11.2.3), Companion ( v0.0.26 ) installed on the Companion Computer (Raspberry Pi), and Ardusub ( v4.0.3 ) installed on my Pixhawk. I’m su…
-
Update guide (or write a new one) for these other locator types. Will require requisition of an S1 and U1 for testing.
-
### Feature Type
Adding new functionality to the BlueROV2 driver
### Problem Description
Users are currently required to develop their own motion planners and interface them with a controller. This…
-
1.
After re-scan, the following message will be returned.
"""
[Static_SLAM-23] process has died [pid 10213, exit code -6, cmd /home/~/catkin_ws/src/Tim-HW-BlueRov2_Sonar_based_SLAM-/src/icp/main.py…
-
-
Turn off Wifi
$ sudo iwconfig wlan0 txpower off
Turn off Bluetooth
$ sudo rfkill block bluetooth
Stop USB devices
$ sudo modprobe -r usbcore
...etc.
Stabilize the Raspberry Pi by reduci…