-
Nothing happens whenever i use Zmax or M5 Stop pins as servos. Only Bltouch works. But i need at least bltouch and another servo working.
I redefined pins and change num_servo to 2. no luck
-
Sending the signal to the servos has a very long delay.
- Questions raised:
- Are servos in series the only option, or can groups be placed in parallel?
- Use of communication between wireless ESP
-
I cant figure out the Servo usage, this is the shell error:
```
Traceback (most recent call last):
File "/home/pi/Desktop/nanpy/RobotCode.py", line 28, in
servoA = Servo(2)
File "/us…
-
Using a 2 axis servo gimbal on a quadcopter on main branch, Ark Fmu-V6x FC with control allocation, dshot output on outputs 1-4 (motors), and PWM 400hz on outputs 5&6 for gimbal servos.
mnt_mode_i…
-
I am copying this conversation from email so that others can use it...
> On Thu, Jul 10, 2014 at 7:54 PM, Nicolas Alt wrote:
> Hi Dave,
> We are planning to buy/build your ClamArm. I noticed that you…
-
Servos twitching during unit testing of assembly in various locations.
It appears that there may be some kind of electrical issue affecting the circuit due to the large power draw of servos.
-
Add the ability to change the name of servos and macros.
-
The repo contains an [example](https://github.com/linuxcnc-ethercat/linuxcnc-ethercat/blob/master/examples/omrg5/omrg5.xml) for Omron G5 Servos:
```xml
```
But this …
-
hi I'm trying to use the OpenM-X with Processing and OpenCR, but once i upload the open_manipulator_chain file from the ArduinoIDE, the servos on the manipulator lock up. Not only that, but when I st…
-
El hexápodo tiene una barbaridad de servos (mínimo 18) que necesitarán control. Un Arduino normal en principio no puede manejar tantos, así que esta issue servirá para decidir un método de control alt…