-
A recent porting project highlighted a potential deficiency in the SPI Rev A driver. The baseline project is heavily interrupt driven and utilized the SPI bus. At points in time, the SPI callback fu…
-
### Introduce the problem
I want to connect SSD1306 (128X64) display with ESP32 using SPI communication. The LVGL already has I2C communication for this particular Display. I have modified that code …
-
### Description
The `spi_host_winbond_flash_test` checks the manufacturer and device IDs of a Winbond flash chip connected to the SPI host.
The device ID is hardcoded but the test should work with…
jwnrt updated
2 weeks ago
-
I am looking at configuring am OpenEVSE charger for use at home. Home being very visible near the sidewalk in a busy city, I'm hoping to have some locking for my charger so nobody can roll up and just…
-
### Description
Get spi_device ready for V2S signoff and sign it off
-
Hi, obbo thanks for the great library. i have been using it with an ESP32S3 together with an Mikroe ADC click 9 (MCP3564), the MCP3564 is using an reference voltage of 2.048V coming from an MCP1501 wh…
-
**Describe the bug**
The PIO-based SPI driver for the Raspberry Pi Pico (and the RP2040 in general) sends data out the SPI bus in the wrong byte order when SPI_WORD_SET() is 16 or 32 bits, and revers…
-
### Board
custom PCB
### Device Description
ESP32-S3 FN8 with three SPI devices:
ICM 20948 9-axis IMU
MS5611-01BA03 barometric pressure sensor
192x64 monochrome LCD
### Hardware C…
-
### Description
Get spi_host ready for V2S signoff and sign it off
-
Dear Sir,
Would you please consider to enable FB0 and SPI2 on Duo256, SPI3 on DuoS by default? Thank you.