-
hi i cant figure out how to add 2 usb cameras any help would be great .
thanks
martin
@noahwilliamsson
@RobeeeJay
@ayufan
-
Trying out a setup with only canon cameras instead of the 5 raspberry pi's. Goals of this is to check if its more robust and to implement the extra canons cameras with the entomology gui.
So far the…
-
Using ros2_master, USB Allied Vision 1800 U-1240c, Vimba 6.0. Each camera works separately. But when I try to run both simultaneously, only the camera started first will output. This behavior is also …
-
Hello there,
I wanted to sync images from 4x daA3840-45uc cameras. The requirements are not that strict - I need only a single frame for each of them every 1s approximately. So I wanted to try a so…
-
I have just done a fresh install of Raspbian and Motioneye (using the instructions at https://github.com/ccrisan/motioneye/wiki/Install-On-Raspbian).
When i go to add a camera no USB devices are sh…
-
I have a device equipped with 18 USB cameras, employing hardware triggers. Using the retrieveresult() function to capture an image from each camera in sequence . write a code to log the execution time…
-
## Background Info
Currently the PID's of each device is saved in a file in the logs/ directory. This is then read by stop_data_collection.sh to kill these devices.
## Description
For some reason…
-
I have a camera that works with the usb protocol. I've added this external camera to your device using a USB-C to USB-C cable, but when I run lsusb, I can't find the camera! Is there a solution to thi…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
I used the following python code to try to open the binocular camera, the actual effect of opening only opened the right camera, and then the camera data is cut into two parts, I do not know the reaso…