-
Hello Edwin,
First of all, thanks for this wondefull app in Homey Pro, I'm using it a lot for monitoring and managing my StorEdge inverter and connected 13,8kWh home battery (3 modules of 48V 4,6kW…
-
Hi!
Thanks for the great project. It enabled me to make my non-Victron ESS visible within VRM.
At the moment, I don't really understand how charging/discharging is handled by your driver or, bet…
-
When we set off all the PWM input signals, i.e. all terminal to terminal voltages are null, we should measure a null current, but instead we get a noisy measurement with a peak to peak amplitude of ~1…
-
This case breaks cvc4 but it takes 2+ hours to verify:
```
#include
unsigned int nondet_uint();
#define MAX_INTEGER 2147483647;
#define GET_MATRIX_SIZE(arr) ((int)(sizeof(arr) / sizeof(arr)[…
-
Considering we can use 16s NMC cells too, it would be better to get the 64V or next higher Reverse Stand off Voltage Vr rated SMC TVS diode in bms-power-100a boards for D1 and D2.
-
Since time hasn't been on my side lately, and for some more months likely, I found the reason to take a hard look at the project as realistically as possible to see how it should best be furthered.
…
-
Hi,
Is there any plan of supporting growatt MOD series? It's RS485 based
-
From @gkasprow
> Btw, the 3U PSU is under development. One can see some drawings [here](https://viewer.autodesk.com/id/dXJuOmFkc2sub2JqZWN0czpvcy5vYmplY3Q6YTM2MHZpZXdlci90NjM3MTMyMTY5NDI3NjA3MzM4X…
-
Hi
I have the same problem occured in this closed issue :
https://github.com/RobotnikAutomation/barrett_hand/issues/1
Initialization fails, following the proposed suggestions written in the closed…
-
The RS8 has buttons on the right side for Spa Drain / Spa Fill
We have the ability to Spa Fill but NOT Spa Drain.
Can we get the Spa Drain as a button same a Fill?
Other options, I hate having to …