-
1. Change the servo to a motor instead
2. We need the touch sensor coded to reset the motor rotation to 0 when the lift is all the way down.
3. Possibly add a motor stop when switch is hit
4. Use Driv…
-
Hi,
I am trying to use this ROS driver to command motor position. When I launch the launch file in the readME, I get the error shown in the screenshot below. The motor I have is sdc2160 and I'm u…
-
When I plugged in the 330s into the driver board (without a voltage reducer), which was plugged into the 12V power adapter, it immediately went up in smoke... am I supposed to use the voltage reducer …
-
### Wiki Search Terms
FluidNC lock up.
FluidNC crash.
FluidNC panic.
controller lock up.
### Controller Board
MKS Tinybee
![20240903_113438](https://github.com/user-attachments/assets/…
-
Hi, author. It is a good project. beautiful code style, but I didn't get more examples about current sensor demo. could you give more example for referencing. thank you
-
### Wiki Search Terms
Motor, Axes, Motor issues, pretty much everything
### Controller Board
6-pack Universal
### Machine Description
Shapeoko 3XXL
![IMG_9752](https://github.com/user-…
-
Should we be using a new repository or a branch in the motor repository?
You are making improvements to the Newport drivers, etc. These improvements should be merged back into the motor repository …
-
**Describe the bug**
The motor skips approx every 2 seconds, in open loop as well as closed loop.
**Describe the hardware setup**
- Which motor - 1.8 degreee stepper
- Which driver - Custom 4PW…
-
I looked through your .ino source as well as the schematics. The service manual has a pin called "inside up" mapped to pin 6 of the connector and you have some code for x1_6. Is reversing the motor …
-
Hey Mike,
Thanks for all the hard work! I have been planning on building a jukebox for a while, and have an idea of running a DC or stepper motor with an actual spinning record while a song is play…