-
**Issue 1:**
When a VTOL transitions into fixed wing flight airspeed and synthetic sideslip fusion are activated. However, this is done in different ways. Airspeed fusion is activated by the fact tha…
-
Hi there,
I packaged openscad for Mageia and we're currently having a build issue with 2015.03-2 since boost 1.60.0 was introduced in Cauldron, our development release.
The build fails with:
```
g+…
-
1. Clarify conditions under which internal compass might be used
- Recommendation is *always* use an external magnetometer if you can (usually combined with the GPS) mounted as far from other elec…
-
Atb - trainees gain no XP if lance officer primary roll is other than MW, even if secondary roll is MW and meet veterency requirements.
-
We flew a VTOL (Delta - Quad) with Pixhawk 1 (no silicon errata), executed auto (mission) the VTOL climbed, made the transition and reached the first waypoint, then it started to fly in a straight lin…
-
Some canon units, e.g. the J-37 Ordnance Transport have built-in cargo space, described as: "Cargo Space (1 door) - 21 tons".
This equipment cannot be removed in Mek Lab, limiting the usefulness of…
-
region `flash' overflowed by 933 bytes
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
make: *** [px4fmu-v2_default] Error 1
-
The use of VTOL parameters is a mess.
We have:
- generic vtol parameters in vtol_att_control_main.cpp
- airframe specific vtol parameters in the corresponding source files (e.g. tailsitter.cpp)
…
-
This issue represents all the crash reports we've seen on 1.7 where the log stops in-air.
https://github.com/PX4/Firmware/issues/9108
https://github.com/PX4/Firmware/issues/9139
https://github.com/PX…
-
@dagar
Based on the discussion in https://github.com/PX4/ecl/pull/372 and https://github.com/PX4/Firmware/issues/8508 my understanding is that we want to initialize the throttle integrator with the …