-
Apologizes that this may be out of the blue. I am very interested in getting the GPS data from my Bebop 1 and mapping in a GIS tool. I understand that this [could be possible](https://parrotpilots.com…
-
The idea primarily is intended for supporting a "wireless" setup for the hotend/extruder, so that most of the wires are coming from a secondary board instead of the primary board. with ESP32 we can pr…
-
如题,ADC初始化时没有相应的库函数进行中断使能标志置位导致无法进入中断
参考v0.3手册54.4.19 INT_EN寄存器功能
https://github.com/hpmicro/hpm_sdk/blob/b612c6fda97a8d16de16b80bf06fa54f15043496/samples/motor_ctrl/bldc_foc/src/bldc_foc.c#L180
-
I'm wondering why it's possible to do FOC without sampling phase current.
cvabc updated
9 months ago
-
I did the installation using the installer (flash.bat -> discord version 0253b).
I'm trying to setup the WIFI from the web client (192.168.1.1). I can't do it work. I have tried with two diferents …
-
### Variant
None
### Control type
None
### Control mode
None
### Description
Hi,
I am not sure if you tried already, but [simpleFOC](https://simplefoc.com/) would work on your board.
The la…
-
5/10のホンダでの試走で判明した.感覚的には3m/sくらいから従動輪が進行方向を向かず,従動輪に引っ張られる形でスピンしてしまう.
必ず左方向にスピンすることから従動輪を点検したところ,従動輪が機体に対して水平でないことが分かった.これだけが原因かどうかはわからないが,これを直さないと高速度域でスピンせずに走行することはできないと考えられる.
その原因は従動輪の作成した治具にある.タップ…
hcmos updated
1 month ago
-
its a bit strange that i dont found any way to rotate a bldc in both direction especially for those gimbal motor
-
When using a power switch and listening for `event-shutdown` in LispBM, there is a hardcoded 100ms window to perform cleanup before the VESC is turned off. While useful to store encoder state or simil…
-
**Describe the bug**
I am trying to attach a nanotec controller (CL3-E-2-0F) to operate a BLDC motor (DB42M03). I created a single-motor package configuration using the Canopen tutorial and the Trina…