-
If you used the old servos we have:
- we solve #1
- we need new pulleys as their axis has different diameter (so we reopen #4 )
- we can rotate 180 degrees (instead of 150).
I just tested them w…
-
When I run the command Servo.py. I get the following error:
Now servos will rotate to 90°.
If they have already been at 90°, nothing will be observed.
Please keep the program running when installin…
-
i'm noticing regularly occurring when using one or more servos
the irregularities seem like two types: 1) communication drop outs (some messsages missed, it then keeps going, 2) freak out (servo must…
-
_From [adcosta...@gmail.com](https://code.google.com/u/110890735615515745620/) on September 18, 2013 03:03:00_
I like this library, but when I try to control multiple servos it only controls them ind…
-
-
does this library still work? I can't seem to control the servos with a Docker container running Ubuntu 20.04. `lsusb` still brings up the Pololu Maestro device, but none of the commands work. I have …
-
-
- we rely on cheap continuous rotation analog sg90 servo motors for the flippers/ears on the RSC
- they cause vibrations, noise and electrical feedback noise when operating
- no position feedback mea…
-
- https://robotics.stackexchange.com/questions/13899/how-to-apply-inverse-kinematics-with-angle-constrained-servos
- https://github.com/MelonFruit7/Inverse-Kinematics
- https://github.com/CodingTrai…
-
Everything seems to be working as expected but I have noticed my Servos are moving extremely slow.
Initially I have powered this from my laptop, now a standard USB phone charger, no change
I am …