-
[edalize](https://github.com/olofk/edalize) is probably the most popular library for interfacing to EDA tooling and [used by the FuseSoC tooling](https://fusesoc.readthedocs.io/en/rtd/tutorials/1-gett…
-
/tools/Xilinx/Vivado/2021.2/bin/rdiArgs.sh: line 311: 8214 Killed "$RDI_PROG" "$@"
[Mon Nov 8 11:38:08 2021] synth_1 finished
WARNING: [Vivado 12-8222] Failed run(s) : 'synth_1'
…
-
### Subject
[Flow] for any util, flow Makefile, or flow script issues.
### Describe the bug
When running `make DESIGN_CONFIG=./designs/nangate45/swerv/config.mk` I get output about `bash: - : inval…
-
Hi All,
I am looking to achieve performance improvement on the provided example tests (cmark, dhry) without the use of the 'target=high_perf' flag. I thought I could do this by using the CONF_PARAM…
-
Revisar `proc.tcl` si hay reportes que no se están generando como p.e. ${rptFile}_comb_loops.rpt
-
Hello,
I have a nexys a7 (same as nexys4), i followed the readme, generated the bitstream compile hello.c, send it through jtag and gdb.
But i receive nothing on serial port one and two of the fpga …
-
-
I wanted to add my custom CSR like MRAC in Whisper, how can i do that?
Also accessing MRAC via _peek c 0x7C0_ gives **Failed to read CSR: 0x7c0**
How can i resolve that.
-
I am following the 'debugging' sequences.
In normal simulation, "SweRV+FuseSoC rocks" is displayed.
But, in debug mode, there is no response from simulator after "releasing reset" message.
Please c…
-
Hello, this seems to be an interesting project but I am not sure about its purpose.
Is a demo or more info available somewhere?
Thank you!