-
I have a suggestion for improving the AB front idlers as I've had some damage to my belts due to how they are designed. Currently, the idlers are tightened using a screw at the front which are aligned…
-
The link to 120decibell's macros on https://docs.vorondesign.com/community/macros/ is broken and gives a 404.
-
https://docs.vorondesign.com/build/electrical/mini12864_klipper_guide.html
A user recently had a problem getting the display working, misunderstanding the header flip image and thinking "yes" meant…
-
Voron 0 printers uses 15 mm × 15 mm aluminum profiles, while the Switchwire uses 30 mm × 30 mm or 30 mm × 60 mm profiles. There's a need for new base plates in order to fit these profiles, as right no…
-
blower_housing_rear doesn't quite have enough clearance for the wires of the BOM (2.4) blower, leaving two options - wires are crushed against the housing, or remove the wires from their clips and ris…
-
From the V0.1 sourcing guide:
> print panel clips that match your panel thickness, if you are in between print the smaller size
V0.0 had different sizes, (2.0, 2.5, 3.0):
https://github.com/V…
-
Can we add to https://docs.vorondesign.com/build/startup/#xy-homing-check
Once there is a tested process for stopping the printer in case of something going wrong, send a G28 X Y command. This will…
-
Hey there
So I tried getting this to work but I always end up in a i2c comm error, which makes sense since default pins are set to the values for 1.2 board it seems:
https://github.com/KevinOConno…
-
I was hoping to get the CAD models of this to see if it could work on the v0.1. I definitely like the Hextrudort and would like to give this one a shot. So, does this work with the Voron v0.1?
-
Found discrepancies in the PDF:
Pg 4, b_drive_frame_upper.stl: I have it on pg 38.
Pg 5, z_rear_extrusionbracket_right.stl: I have it on pg 55.
Pg 8-10: The XY Joints & Carriage are weird. They hav…