-
Not really an issue more like a request.
Could you mark the changes you did?
I'm new to 3d printing and I dont want to change things without knowing what and why to change. It is easier to underst…
-
Tengo instalado el Bltouch de Makerbase en la MKS Robin Nano V1. 2 y configurado, todo actúa correctamente pero el Bltouch no saca la aguja por lo que no realiza las medidas. Probado con Firmware V1 y…
-
Hello guys, I got an Einsy Rambo board and wanted to make it work with my own Prusa i3. Trying to configure it for HOMING SENSORLESS feature an also with BLTouch Z sensor for bed leveling. I tried to …
-
The BLTouch sensor is too high using the standard mount and a V6 hotend. It needs a 2mm - 3mm shim.
Antlabs recommends a offset of between 2.3mm to 4.3mm from the nozzle tip [doc reference](https:…
-
I got stuck trying to add a BLtouch & NeoPixel setup to my Ender 3 with the SKR v2 mainboard.
The works fine with the BTT pre-configured firmware (firmware-bltouch.bin).
I tried to add the BLtou…
-
I have a v1.2 mini e3 and a v3.1 Bltouch
Sometimes it deploys on command but quite often it does not deploy on command and seems hellbent to crash into the bed, occasionally it sits for a minute and …
-
Hi,
I setted up my BL touch on my Robin Nano V3 following the MKS tutorial but one thing is missing, the BLtouch setting menu where you can also set the Z probe offset.
How to enable this menu ?
-
Hello,
I installed Marlin Build from your repo here: (v.1.1.9)
https://github.com/MNieddu91/Marlin-AI3M-BLTouch
My settings in configuration.h looks like this:
`//#define PROBE_MANUALLY
//#de…
-
I run homing, the x homing was OK, when the build plate went back to hit the end stop, it kept hitting the end stop without stopping,
Error:
echo:Homing Failed
Error:Printer halted. kill() call…
-
### Description
I have downloaded `firmware-ender3-bltouch-for-z-homing.bin` from here: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Marlin
Trying to home the…