-
The following program works flawlessly on esp8266 nodemcu
but will not work on esp32 wroom da
It seemed at times i was able to blankLEDs but when I went to turn on an individual....it will not work.…
-
LOG
[homebridge-magichome-dynamic-platform]
Discovered 1 devices.
[30/09/2023, 18:44:10] [homebridge-magichome-dynamic-platform] [discovered+cached] platform.ts discoverDevices() accessory creat…
-
### Prerequisites:
- Before requesting a device addition, please ensure there is not already a request for the device among the open issues.
- Make sure your Homey is upgraded to firmware v5 or hi…
-
I have a LED strip recognized in Home Assistant as light.cozylife_music_rhythm_light_strip
Connection is frequently broken. Commands cannot be executed due to a "broken pipe" error.
Log:
Logger…
-
## Current Behavior
The 2 led on the left side are showing "GPS not fixed" status.
The 6 led on the right are in "Color" mode, and RED color number 2 is chosen.
![IMG_20240112_154809__01](https:/…
-
**Feature description**
Basically wire that glows
**Feature purpose**
Its simpler and less resource dependant to just put a wire instead of 10 lamps
**Additional context**
none
-
Fit LED strips to light up the vending machine
-
### Feature Request
LED support in the LCD.
So i got it to work. Problem is now that there is no LCD control for it . But marlin code is working. I use a WS2812B Strip.
https://nl.aliexpress…
-
## Bug report
**Issue details**
A Matek M9N-F4-5883 was not driving an 8-neopixel strip attached to the LED port; as an AP_Periph. If I flash Rover for MATEK-CAN, the LED strip works as expected…
-
### What happened?
Latest v14 works fine on Lolin D1 Mini v4, when I move to 15b4 I can't get the LED settings to work. I run 2 strips of 512 leds, using GPIO 2 and GPIO 1. I can configure and use on…