-
When two nodes write almost at the same time to the CAN bus, this may cause the CAN bus to stop working on one of the nodes. This is very likely to happen if for example SCU sends things to VCU and at…
-
I am working on a custom ESP32-wroom-E32 board and am getting Send Failed errors after a delay depending on the size of the buffer I create. At the moment I am using the Battery Monitor example with …
-
When using a StreamDeck to recall camera presets through Middle Control it disengages or disconnects from the Blackmagic Television Switcher thereby not saving my zoom or focus in the preset. After ab…
-
Try to get CAN bus sniffing working because this would make integrations with the car a lot easier without having to rewire things or cutting wires.
This should normally also give access to steering …
-
Cleanly implement CAN bus onto the subsystem computer
-
Having CAN bus supported by the API would be nice for automotive/industrial use. I believe the LPC4330 has support for it with C_CAN0/C_CAN1. Is this on the roadmap anywhere? Has anyone played around …
-
I have come across a can bus implementation for esp-idf (https://github.com/ThomasBarth/ESP32-CAN-Driver). There is also an implementation for the pyboard available here https://github.com/micropython…
-
### Check for previous/existing GitHub issues
- [X] I have checked for previous/existing GitHub issues
### Description
I'm rewriting some of my bicep code to use AVM as much as possible. For my ser…
-
Make a CAN Bus article showing how to control dashboard gauges from a car.
Need to get:
- 120 Ohm resistors (2): https://www.ebay.co.uk/itm/313808481666 (may already have these)
- Twisted pair …
-
bus.Dispose();
-----
this can not close the connection to rabbitMq
another the bus.IsConnected is always =false
in the rabbitmq web page ,you can see the connection
--but afte…