-
HOW TO RUN PLASMATREE (MAC-OSX)
#Install:
Python 2.7(https://www.python.org/downloads/release/python-2715/
PIP: (https://pip.pypa.io/en/stable/installing/)
Homebrew + Git: (https://gist.github.…
-
the FollowMeTag gives the following error - Arduino: 1.8.3 (Windows 10), Board: "Arduino/Genuino Uno"
c:\program files (x86)\arduino\hardware\tools\avr\bin\../lib/gcc/avr/4.9.2/../../../../avr/bin/…
-
Setup:
- ZTW Spider 40A Opto
- BLHeli 14.7
- Damped Light: Disabled
- PWM Frequency : High
- Break On Stop: On
- Motor: EMAX GT2212/09 1100KV
After enabling "break on stop" and switching between Clea…
-
### Bug report
**Issue details**
The Yaw drift on APM much much higher than that on Betaflight/Cleanflight when not using a magnetometer. We observed drift of about 1 degree in 1.5 mins on betaf…
-
- [ ] Rebase on INAV 6
### Ideas for new FC Targets
Optimal for easy wiring and availability:
- [ ] Matek F411-WSE
- [ ] Matek F411-WTE
- [ ] Matek F405-WMN
Very cheap option but needs …
-
![33994742_1582540475207846_8129618104796839936_n](https://user-images.githubusercontent.com/34765769/40813092-674f8518-6539-11e8-8d17-9e36f86739e4.png)
![chassis choisi](https://user-images.githubus…
-
I cant get a tail servo to move on any of the 5 non motor outputs. it just goes to center pos and stays there. I think that servo 5 does not get mapped to a PWM output anywhere for that board.
-
### Is your feature request related to a problem? Please describe
BF is too hard to navigate using the 'project' tool windows in CLion, Eclipse and other IDEs where the source directory is presented …
-
Hello. Congrats for all, I made the update very easily.
I bound the i6 moded with the i10 rx
I have a Naza FC and in PPM, the flight mode channel is in ch7.
Channels 7, 8 , 9 and 10 can't be changed…
-
I finally got the latest rel. of MPNG uploaded to my Crius AIO Pro v1.1 and while it connects to Mission Planner with no problems I've run into a nasty recurring issue with the radio inputs.
My radio…
ghost updated
9 years ago