-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
1. I run a bed level using BLTouch and store setting.
2. do a test print and use babysteppin…
-
**Update:** @vertigo235 set up a Discord server for this issue, if you'd like to discuss/work with people on the problem. Here's the link: https://discord.gg/hYUjSnW
This issue has been closed afte…
-
Tracking updates of www.redditgifts.com
-
Create drawing OH4A9A1 - ASSY, THROTTLE QUADRANT.
- [x] Add note to 96765A115 washer on outboard throttle grip to remove material so it does not interfere with pushbuttons.
- [x] Add view showing how…
-
I have a 12 gate ERCF. My Voron 2.4 has a single extruder and my GCode uses gates 1, 3, 5, 10 and 11. The GCode executes through the first layer but when it tries to start the second layer it experi…
-
My MMU2(S) sometimes leaves the idler (idler-body) in the wrong position, where the MMU2 idler is engaged even though filament has reached the extruder and print has started.
This gives underextrus…
-
I have been playing around with a simple n+1 particle pendulum. The first particle may only move in X direction.
The particles are connected by (unbendable) springs and dampers.
Using velocity const…
-
I am hoping this is not another hardware / false alarm, but I shall mention it anyway.
**Describe the bug**
Bed Tramming Wizard, with ‘Calculate Averages’ OFF.
Each time the Wizard is run, WI…
-
-
Might there be a way to fit a Bézier curve to the trapezoidal profile of the velocity curve similar to what [TinyG](https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained) and [Marli…