-
-
There are some situations where it is necessary to disallow redefining the position of an axis with an absolute encoder.
This can be done at the driver level for model-3 motor drivers:
https://g…
-
Cloned designs of motor driver may have different operations than specified here.
https://forum.arduino.cc/t/l298n-h-bridge-jumpers/965521
-
```
mosfet based motor driver
```
Original issue reported on code.google.com by `pawel.ra...@gmail.com` on 22 Apr 2011 at 11:27
-
I got in a motor driver today that is too large for the enclosure. I purchased from the provided link. but it appears that they don't have terribly tight tolerances on the heat sink extrusions.
The…
-
I'm triying to modify this file https://github.com/ROBOTIS-GIT/OpenCR/blob/master/arduino/opencr_arduino/opencr/libraries/turtlebot3/src/turtlebot3/turtlebot3_motor_driver.cpp in order to add a new f…
-
new to Arduino cnc, I loaded the default setup to my ESP32 but don't know what to do to assign pins.
I found one document saying what pins do what
https://github.com/bdring/Grbl_Esp32/wiki/Setting-U…
-
```
mosfet based motor driver
```
Original issue reported on code.google.com by `pawel.ra...@gmail.com` on 22 Apr 2011 at 11:27
-
In the current implementation of the system, the sound produced by the stepper motors of the lung system is audible and sometimes distracting from the sound actually being produced by the recorder. On…
-
**unable to configure PWM on teensy 4.1**
i am trying the "samples/basic/servo_motor" example for teensy41 board, below have attached the overlay for teensy41 but when i build the same i get error.…