-
We tested the UDP bitrate from the board to the laptop to reach 50Mbps using the command iperf3- c xx.xx.xx.xx - u - b 0.
But on the contrary, the UDP bitrate from the laptop to the development board…
-
I have captured the IQ data of wifi transmitter by USRP B210.
Is this available for the IQ data captured from USRP B210?
-
Hi xianjun,
I'm confused about how the RSSI value is obtained, and why is the rssi_half_db_offset 150? If I want to use the 1G band, how should I determine these values?
```
if (freq_MHz
-
Dear Jingshi,
I am a researcher from Ghent University, your open source project looks very interesting, and we'd like to test it on USRP N210. Though I am not able to synthesize successfully. Could y…
-
As mentioned in the readme, you can use SDR devices or wireless network card for fuzzing. So what are the restrictions on choosing a wireless network card for fuzzing compared to using sdr?
-
Hi ,
I have designed a zynq + ad9361 board which runs openwifi well .Hareware feature is : ZYNQ XC7Z020CLG400 ,1GB DDR3 memory fo PS, 1G ETHER RJ45 for PS,1G ETHER RJ45 for PL, USB OTG(act as USB ho…
-
Hello! I'm exploring the possibility of using openwifi for sensing, and I found that about 7 packets can be received per second, which seems to be insufficient for sensing. Modifying the MCS did not …
-
0. Could you send email to [xianjun.jiao@ugent.be](mailto:xianjun.jiao@ugent.be) to introduce your self?
yes
1. Our image is used directly or you build your own image?
use yours directly
2. Wh…
-
Hello,
I am running with the image provided for zedboard_fmcs2, with no modifications and the newest image available here.
My issue is that trying to run the openwifi implementation on the zedboar…
-
Currently, OpenWifi supports a list of supported hardware (see - https://github.com/open-sdr/openwifi).
This ticket aims to leverage the [SoapySDR API](https://github.com/pothosware/SoapySDR/wiki) …