-
Main body in
https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/STL/Main_Body_EBB.stl
Can't fit with
https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2…
-
HI I AM WONDERING IS YOU HAVE THE SIDE PANEL FOR THE KEWEISI METER
FOR THE VORON 2.4R2 SIDE SKIRTS AS THERE ARE NOT THE SAME AS THE
r2
ghost updated
2 years ago
-
I have build the Klicky NG for my Voron V0.2 and it works well with the normal probe.
But with the long probe I experience the problem that the magnets seems not to be strong enough. When I put pres…
-
Hi guys,
I am not finding a parts list for a standard ClickyNG for voron 0.2r1. Its very confusing trying to piece the correct assembly. Can you please organize a "common" zip assembly for 0.2r1?…
-
Hello,
Is it possible to upload symmetric skirt without HBB for 300 version? As the versions i found are not having same looks
For 350mm i see you uploaded versions with Knomi, can the same be…
-
I keep getting errors:
Section 'autotune_tmc stepper_x' is not a valid config section
Here is my config section:
```
[autotune_tmc stepper_x]
motor: ldo-42sth48-2004mah
[autotune_tmc ste…
-
### What happened?
I started with a stl and I wanted to drill a couple of holes in the side. I scaled the original object, then selected it and created a negative space cylinder which I then scaled …
-
Printed everything in ASA on my voron v0.1 which is calibrated very good and had to print 1_ZDriveTensioningRing(Voron).stl with 98% size in X&Y to have a good fit with the thread of 1_MotorMountTensi…
-
### Describe the feature or hardware support you'd like
Bonjour, serait il possible d'ajouter le klipper expander dans les MCUs, je l'utilise pour faire fonctionner les leds sur ma Voron 2.4 parce qu…
-
Not sure if this is an issue with the Klipper Port (not sure what this is) or if it is the fact that I am using OctoPrint
Keeps saying Printer is Unoperational Please Check your Printer on the KNOM…