-
Currently I am developing against a local SpinalHDL `dev` branch, along with local VexRiscv `dev` and the VexRiscv-specific latest OpenOCD (i.e. using the "old" VexRiscv debug module") and I am seeing…
-
## Issue Description
Issue discovered in https://github.com/openXC7/nextpnr-xilinx/issues/20#issuecomment-1942858331
When IS_WCLK_INVERTED property is asserted, we expect the write to LUTRAM to …
-
Using the openocd.cfg/openocd.gdb in the repo I get the following error:
```
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.ht…
-
this shouldn't happen:
```
2:43:05 PM: piview: NoArty
2:43:09 PM: piview: ArtyWire
```
-
The mpsse implementation seems to be buggy. I cannot get this adapter to reliably work with OpenOCD. At times OpenOCD just hangs with the message "Haven't made progress in mpsse_flush()..."
This se…
-
My openocd config:
```
transport select jtag
adapter_khz 1000
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x04e4796b
set _TARGETNAME $_CHIPNAME.cpu
target create $_…
-
### Development Kit
Customer Board
### Module or chip used
ESP32-C3-MINI-1
### Debug Adapter
ESP32C3 Build-in JTAG
### OpenOCD version
Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-1…
-
Doesn't wokr Stellaris-ICDI. I always get a message:
D:\SD\CooCox\CoIDE>"D:/SD/CooCox/CoIDE/bin\coflash.exe" program M4 "D:/Traning/ARM/TIVA_COCOX/TestTiva/Debug/bin/TestTiva.elf" --adapter-name=Stel…
-
Hi,
I am attempting to follow the debugging tutorial on the Espressif web page. I am using an ESP32-S2 (LOLIN S2 mini) and the ESP-PROG JTAG board. I have soldered some thin copper wires to the fou…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…