-
Hi there!
I got the sensor working with the sick_tim310_1130000m01 launch file.
My sensor (TIM510-9950000S01) has a 1 degree angular resolution, while the sick_tim310_1130000m01 has a 3 degree an…
-
I want to increase the speed of the SWD Core in the back direction.
Is there a way to do this?
-
Hello.
I try to build my own diy version of fabscan but i have connection problems.
------------------------------------------------------------------------------
I can use an arduino pro micro (at…
-
## Bug report
**Required Info:**
- Operating System: Ubuntu 20.04
- ROS2 Version: Foxy
#### Steps to reproduce issue
Set goal pose to a position the robot can not reach. For example close…
-
Hi,
I want to use your package to create a wall following algorithm where instead of checking directly the distance to the wall through the laserscanner points, I want to just compute the distance t…
-
https://www.sick.com/ag/en/localization-and-positioning-solutions/line-guidance-and-grid-localization/gls6/c/g507063
Hello! i have this model of camera. may somebody tell me, how is it possible to …
-
Hi
I am very new to this device.
I have already two 3d printers and raspberry pi connected to them and use octoprint.
I decided to buy a 3d scanner which is affordable for me and many people sugge…
-
Issue Template © Siemens AG, 2017-2018
Author: Dr. Martin Bischoff (martin.bischoff@siemens.com)
-->
* [ ] I am at the right place and my issue is directly related to ROS#. General technical ques…
-
Hey, I found you used the gt depth as follow in evaluation:
` if vel_depth:
velo_pts_im[:, 2] = velo[:, 0]`
I understand it that the depth is in velodyne laserscanner coordinate. Howeve…
-
Hi,
can anyone give me a hint how to work with a laserscanner?
I tried working with adb getevent and received the following things:
`add device 5: /dev/input/event0
name: "keyremap_vir…