-
```
What steps will reproduce the problem?
1. get a fresh install of nxt-python 2.2.2 working on Linux, connected to the
brick via USB; the brick is running the latest leJOS firmware 0.9.1
2. check …
-
Ultrasonic sensor is active sensor (type LOWSPEED_9V), and should be used along with LSREAD and LSWRITE commands. Currently, ultrasonic sensor return always 0.
-
I have made some minor modifications to the library to handle 4 sensors.
https://github.com/vmanoj1996/ultrasonic.arduino.ICUX0201
Here is my brief workflow:
1. Initialize the sensors. first one …
-
# Proposed Functionality
Attach an ultrasonic sensor on the side of the robot to detect how far it is from the sidewall of the field. Based on this distance (aka the position of the robot), the ro…
-
```
What steps will reproduce the problem?
1. get a fresh install of nxt-python 2.2.2 working on Linux, connected to the
brick via USB; the brick is running the latest leJOS firmware 0.9.1
2. check …
-
## Summary
Uses ultrasonic sensors to prevent wall collisions.
## Context
With ultrasonic sensors, detects surfaces and stops robot before collision.
## Acceptance Criteria
-Must use (4…
-
Add support to use ultrasonic and/or IR distance sensors for proximity detection. They can then be mounted under the hexacopter to improve accuracy when landing.
-
-
Is there a way to use ultrasonic sensor for altitude measurement in AR.Drone 2.0?
Please help me
when i close the ultrasonic sensor, i still get altitude value. So, how to measure ultrasonic alone to…
-
Ultrasonic block only reads the EV3 sensor and not the NXT. Have tried multiple NXT sensors, different bricks, cables, and ports with no success. Additionally, I would like to add support for 3rd part…