-
I have some questions about the `simulate` and `irf` commands, in particular how the changing probabilities are treated in the simulations.
The first question is when and how the probabilities are ta…
-
I was trying to make nonlinear regression using Keras. However the result is far from satisfying. I was wondering how should I choose the Layers to build the NN and how to tuning the parameters like A…
-
A lab should have three types of graphs:
1. Phase graph (angle/impulse)
2. Comparison graph (angle/time linear and nonlinear)
3. Fourier series of comparison graph if possible
-
Spice4qucs is a feature that enables to simulate Qucs analog circuits with Ngspice and Xyce engines. See #77 and #181 discussion threads for more info. I and Mike Brinson made more than 80 commits at …
-
**[Original report](https://bitbucket.org/joe_fowler/mass/issues/93) by Joseph Fowler (Bitbucket: [joe_fowler](https://bitbucket.org/joe_fowler), ).**
----------------------------------------
@jojo9…
-
I would like to present my concept of Verilog-A modules builder. Test branch https://github.com/ra3xdh/qucs/tree/verilog-A contains source code. Verilog-A modules builder allows you to convert a Qucs …
-
The 'contour' plot type is very useful but would be even more powerful if it included an automated facility for creating labels. [Mapbox](https://www.mapbox.com/) seems to incorporate a particularl…
-
- coupling determines cross mapping that will be reflected in patterns of correlation (rho ~ Yhat | Mx and Xhat | My)
- differences in convergence on the maximal level of prediction in a time series i…
MKLau updated
7 years ago
-
I installed octomap using sudo apt-get install ros-kinetic-octomap
then tried to install octovis using:
sudo apt-get install ros-kinetic-octovis
it shows E: unable to locate package
What could b…
-
Hi @MarcinKosinski,
I'm writing series of blog posts on survival analyses using survminer for visualization part. Would you, please, clarify for me the two points below:
1)
In the description sec…