-
Hello! Thank you for this wonderful project, Mr. Tarassov.
I wish to add a CAN peripheral. Would you recommend doing this using the provided [Vivado CANFD IP](https://www.xilinx.com/products/intel…
ahmrr updated
4 months ago
-
Hello,
I was checking out the repository to see how to use Linux and Multizone on the same board, and I noticed that it only supports the HiFive Unleashed board, which is now discontinued. I am curre…
-
My board is arty_100, I met this problem when I execute "make prog". May I get some tips or help, thanks. The log show as below.
"(cfu-symbiflow) ggang@ubuntu:~/CFU-Playground/proj/proj_arty7_100$ …
-
Hello, I am new to using CFU-Playground and I was trying to test it running it on one of the boards. I am using the Digilent Basys3 board. I was following the demo Tim Callahan presented in the HPCA 2…
-
Hello,
I am trying to test litex on sipeed tang_nano_9k board. Litex is installed on WSL on windows and tested with various board like the digilent arty-7. The sipped board seems to be programmed …
-
Hello! Thank you for working on and releasing Manta, very excited to use it more and see where it goes!
This evening I was trying to use the logic analyzer core for the first time, but I'm running …
-
### Objective:
Prepare a Linux System-on-Chips (SoC) on the Digilent Arty board, focusing on automating the build process for the target and build root images. The initial setup should include VexRis…
-
I am working on a Nexys Video board, i've tried multiple boards that kept facing issues, however I got my hands on this board and I am trying to run a simple template on it to check that everything wo…
-
Hi charles,
How will it be possible to run linux on Litex-Naxriscv like as https://github.com/litex-hub/linux-on-litex-vexriscv
I like to run (NaxRISCV 64 bit ) RISCV 64 Debian Linux on FPGA…
-
Hi folks,
I'm trying to use synlig as part of a fully open-source flow to load [Wally](https://github.com/openhwgroup/cvw) onto a Digilent Arty A7 FPGA board. The synthesis flow is here under the `…