-
Magnetometer works and all using a raspberry pi and out software module, but the readings are a bit weird.
From looking at them I noticed that they cap at around 10k, It might be a software limitat…
-
Hello,
I have just bought the servo and cut the wood to calibrate my IMUs.
My calibration went fine with the accelerometer and gyroscope (I hope so), at least I could visualize the colored lines and d…
-
## Describe the bug
No serial ports and no magnetometer in PX4-Image for "SP-RACING H7 Extreme PX4 Edition" Flightcontroller
## To Reproduce
Image / padded binary used for installation:
PX4 1.11…
-
Note the internal magnetometer axes do not align with the IMU axes. Refer to datasheet or silkscreen guide on v3.9 board.
-
Hi, we are making a satelite for AAS CanSat 2024 from Yonsei University, and selected Bosch Sensortec BHI360 Shuttle Board 3.0 for 9-DoF IMU and presure & temperature.
I found out that BHI360 Sh…
-
```
Please, include Luminosity, proximity, magnetometer sensors to the sensors list!
And low level controls for camera and display screen luminance.
Thanks!
```
Original issue reported on code.goog…
-
Hello @niru-5,
I hope you are doing well!
I have a few questions regarding the Magnetometer calibration process - how exactly does one properly calibrate the Magnetometer?
Your blog post states …
-
This is about calibrating magnetometer about the same way as before, and calibrating accelerometer in the same way as magnetometer (for unequal axes).
-
As in #6
This arctan2(Mx, My) is needed to be done as function in the calibration class and also be stored in the GUI
-
There is no example of using magnetometer sensor. Also it will be good to see example of getting some data, like roll, pitch, yaw angles
ghost updated
4 years ago