-
----
### Issue details
Hello Everyone,
I am attempting to control a quadcopter‘s position using a camera to move to a target using the difference between the current location of the drone and t…
-
Drive the car with mission planner.
-
**Describe the bug**
HI, I run PX4 in a arm-cortex A7 core in linux. The chip is Allwinner V3s(single core, 64MB RAM).
Kernel version: 4.10/5.2
PX4 version:
```
HW arch: PIPX4_V3S
FW git-hash: …
-
### Issue details
Segfault on startup causing mavros_node to die.
Problem is only seen on Raspberry Pi 3, doesn't happen on laptop.
Problem is intermittent, happens approximately 70% of the tim…
JMare updated
2 years ago
-
FAILED: cd /home/salad/Firmware/build/posix_sitl_default/build_gazebo && /usr/bin/cmake -DCMAKE_INSTALL_PREFIX=/usr/local -GNinja /home/salad/Firmware/Tools/sitl_gazebo && /usr/bin/cmake -E touch
/ho…
f123h updated
5 months ago
-
**Issue details**
Flight modes not processed responding updated
_Please describe the problem_
Version 4.5.2 uploaded to my system.
Mission planner
I am using frsky x20s rx and frsky td xm rx
S…
-
##### System information (version)
- OpenCV => 3.4
- Operating System / Platform => aarch64 (debian based OS)
- Compiler => g++ 8.3.0
##### Detailed description
I have opencv as an external dep…
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…
-
## Bug report
**Issue details**
_Please describe the problem_
Output from throttle channels raises when armed from 1000 to 1010 (with throttle minimum) . This causes the motors twitch and…
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…