-
- we rely on cheap continuous rotation analog sg90 servo motors for the flippers/ears on the RSC
- they cause vibrations, noise and electrical feedback noise when operating
- no position feedback mea…
mbz4 updated
3 months ago
-
```
I have kliment/sprinter installed, motor will move when pololu in the x. No
movement when trying to run in projector mode.
```
Original issue reported on code.google.com by `digitalt...@gmail…
-
Hola, me gustó mucho su modelo de impresora y decidí llevarlo a cabo, una vez montada y puesta en funcionamiento no consigo configurar el firmware para que imprima, los motores solo hacen ruido y piti…
-
The case as provided constantly triggers the sensor even with paint applied as suggested. The only way to stop the pololu sensor from constantly triggering from the case is to pull the board all the …
-
i am working with an pololu ZUMO 32U4 oled. it uses an atmega32u4. The problem is i can't figure out how to make a spi connection with the oled. the problem being that the makers of this board uses ot…
-
I am new to the arduino platform, but I am interested in using a Pololu AltIMU-10 v3 in a project, are
there any guidelines how to add a component to the Dino gem in order to use the AltIMU-10 from ru…
-
Analyse and enable filter settings in the gyroscope, magnetometer and accelerometer.
-
The current copy of QTRSensors contains e.g. no doxygen comments. Therefore important informations for the Zumo32U4LineSensors() are missing in the generated documentation, see e.g. public functions h…
-
Need KiCAD files of our own version of https://www.pololu.com/product/1182 carrier board
We have ancient never fabricated old kicad files at https://github.com/rusefi/rusefi-hardware/tree/main/A498…
-
Hey, this is an amazing conversion project!
Do you have any of your PCBs for sale to make the install look clean like yours? (I also have a Pololu RS232 adapter but it's unfortunate so many people…