-
**Describe the bug**
px4_ros_com successfully compiled inside my ROS2 (galactic) workspace, and activated on the PX4 side.
I manage to make a connection between by UART over USB, but UDP connection…
-
When you have setup a Windows 10 client and host so they support USB forwarding (client GPO `Allow RDP redirection of other supported RemoteFX USB devices from this computer` enabled and host GPO `Do …
-
HI,
I want to do VOIP PCPC.
I found no examples within current project, so I tried tpapro_5.00\examples\ExVOIP0.dpr
I can not select may USB Headset and also got this error message:
voice ov…
-
Hi,
In my design I need to do large transfers from a costum IP to USB over the DMA, because of the design constraints and several other reasons I can only transfer smaller chunks, there for I need to…
cipih updated
3 years ago
-
This was working, I wiped the laptop and reinstalled now I cannot get this working again. The adapter is visible, but not able to use it at all.
$ uname -av
Linux sec0ps 6.5.0-35-generic #35~22.04…
-
Hi,
I have a weird problem and Github issues might not be the correct place to write this. Please forgive me and let me know where to write it in that case.
The problem:
I have a working NUT …
-
Hi folks,
I heard about this wonderful project and wanted to switch with my SLZB-06M to XZG.
Before flashing XZG I was on v2.2.8.dev from smlight.
I always use the device connected via wired ethe…
-
I can connect a basler camera based on Win10 but cannot connect two cameras at the same time
-
**Godot version:**
master (1fed266bf)
**OS/device including version:**
Host: Arch Linux, 64bit
Android Device: Oculus Quest, 9.0.0
**Issue description:**
The short version is `adb reve…
-
```
What steps will reproduce the problem?
1. Print a multi page document
2. Print multiple copies of same document
What is the expected output? What do you see instead?
The file prints as shown on …