-
### Feature request
Full servo control now that servo output is separate from RC Inputs.
**Describe the solution you'd like**
Making a full house glider or other complex setup work with Ardup…
-
## Current Behavior
Wing disarms in areas where RXLOSS is often accuring
## Steps to Reproduce
1. install 2.2
2. use below configuration
3. fly in area/distance where RXLOSS occurs
## Expect…
-
I have recently set up a 1m fixed wing with an F411-Wing and iNav 2.1
I have trimmed it out and completed servo AutoTrim and Autotune procedures. However when I bank hard (I am intentionally limit…
-
The takeoff procedure is:
1. Set mode switch to Manual
2. Increase the throttle, the UAV takeoffs as a Rotary-wing.
3. Keep increase the throttle, the UAV increase its speed and altitude.
4. At certa…
-
## Current Behavior
![image](https://user-images.githubusercontent.com/4030264/59165060-0fac4400-8b16-11e9-87ec-97a6d1c63889.png)
## Steps to Reproduce
1. Flash 2.2.0 RC1 or RC2
2. Arm
3.…
-
Here's the **Weekly Digest** for [*PX4/Firmware*](https://github.com/PX4/Firmware):
- - -
# ISSUES
Last week 52 issues were created.
Of these, 13 issues have been closed and 39 issues are still ope…
-
##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
Ansible
##### ANSIBLE VERSION
```
ansible 2.1.1.0
```
##### CONFIGURATION
N/A
##### OS / ENVIRONMENT
N/A
##### SUMMARY
When I tried to convert s…
-
https://discuss.px4.io/t/unable-to-start-mission-vehicle-not-ready/10896
-
When quad is powered up from lipo, the GPS doesn't appear on the OSD. Replug and plug in, and it always fails to show up, this is reproduceable every time for me.
To get it to work, after the lipo …
-
I can't really find a specific character that crashes, but it happens when encoding this data.
```
%{"nittaku" => ["blade/nittaku-a--p-excellent-a-p.html", "blade/nittaku-aa.html", "blade/nittaku…
Hajto updated
4 years ago