-
If the content that I request is on a device (say a tablet) 2 or 3 devices (i.e. hops) away from me, will IPFS, flood forward my request to neighboring devices until it finds the content? Once found, …
-
Public gardens are often sections within parks but atm there's no visible difference:
https://www.openstreetmap.org/way/191318876#map=19/51.45508/-2.58866
Slight darker shade or a boundary?
-
I have the following sitemap
`sitemap Test label="Test"
{
Frame label="Indoor Climate Control" {
Selection item=HVAC_5_thermostat_mode icon="climate" mappings=[0="Off",1="Heat",2="Cool",3="Auto…
-
Hi hzeller,
I noticed that your Program only supports the boards have this property:
Scan_Multiplexing = (2 / ROWS_of_panel)
for example 16x32 1/8 scan , 32x64 1/16 scan , 32x32 1/16 scan , 64x64 1…
-
I have used mIALocationManager.setLocation(location), three times and app is displaying only one location.
I also want to know the waypoints lat-lang that I generated from the [app](https://play.g…
-
Hello all,
I'm pulling my hair out trying to find the correct settings for my new panel here, so I'm turning to you all for help. First, here is a link to the panel I purchased:
[https://www.arro…
-
Hi,
I wanted to add your project into my android stodio project using gradle but I faced this error
`Error:Error converting bytecode to dex:
Cause: Dex cannot parse version 52 byte code.
This is…
-
I wanted to exploit the fact that Cartographer gives pretty accurate position estimate. I used Cartographer just using IMU and laser to make an indoor map, and it pretty good.
Then I want use Cart…
-
*I am trying to use motion capture data by qualysis system for position estimate of the PX4 in hexacopter.
-Run mavros
-Push motion capture data to mavros/vision_pose/pose using a publisher (there is…
-
The rulebook states that
> The operator gives the robot a command to carry something, e.g. a box or a bag. E.g. "Carry this box"
Box and bag are not listed within Section **3.2.5 Objects**, the…