-
After using the target script for digilent pynq z1 board, i can see the led chase in my board but when i try to get bios running, i get no response from the card. is there anything i miss ?
-
This is an RFC for #308.
Some chips like the Intel Cyclone V SoC and Xilinx Zynq require `Instance`s to access certain I/O functions not directly available through top-level module ports. Others, s…
-
Installed surface-kernel using [Method.1](https://github.com/linux-surface/linux-surface/wiki/Installation-and-Setup#method-1opensuse-softwarekernel-default) but the touch screen, digitizer, a…
-
First of all, I thank @nand2mario and @Chandler-Kluser for contributing those efforts to the NES platform.
However, there are many copied and reworked NES platforms nowadays.
For example, MAME (…
-
### OS
Windows
### Operating System version
Windows 10
### Visual Studio Code version
1.92.2
### ESP-IDF version
1.8.1
### Python version
3.11.9
### Doctor command output…
-
@dkhughes @cdsteinkuehler
Adding the [Ultra96V1](http://zedboard.org/product/ultra96) and newer [Ultra96V2](https://www.96boards.org/product/ultra96/) to the [mksocfpga](https://github.com/the-snoww…
-
https://github.com/enjoy-digital/litex/blob/2f5481dbb9ff22cff03f21e8e7d418442b778908/litex_setup.py#L353
```
/usr/lib/gcc-cross/riscv64-linux-gnu/11/../../../../riscv64-linux-gnu/bin/ld: ../libc/l…
-
When I run: `sudo ./icebreaker.py --debug --flash`
I get this error which seems to imply that the SoC no longer fits inside the Ice40 using the latest versions of LiteX and Yosys:
`Info: Running…
-
I tried to edit `$(call force,CFG_TEE_CORE_NB_CORE,8)` to `$(call force,CFG_TEE_CORE_NB_CORE,1)`, but the operating system will stuck at some point of booting process. Looks like linux tried to wake u…
-
I'm currently working with an OrangeCrab FPGA, and trying to load code after the boot, following the indications given on `litex/litex/soc/software/demo/README.md` (build and load over LiteX-Term).
…