-
Hi,
Any idea why even though there's no error during the boot process I have no wireless device?
```
U-Boot SPL 2016.03 (Apr 08 2016 - 09:51:22)
Trying to boot from MMC
U-Boot 2016.03 (Apr 08 201…
-
The way that UARTs are used by TF in the FVP and Juno ports is inconsistent. The FVPs have 4 UARTs available for use, UART0 - UART3. Juno also has 4 UARTs but 2 of these are SoC UARTs, which are expos…
-
The Xilinx Zynq-7000 series devices are a combined ARM processor with a "series 7" FPGA. The [Digilent ZYBO](http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,1198&Prod=ZYBO) is a very chea…
-
Red Pitaya is a credit-card sized measuring device that runs Linux and has Ethernet and USB. It has two RF inputs and two RF outputs (50 MHz, 125 MSPS, 14 bit), all connected to an Xilinx SoC that inc…
-
Here's an excerpt on an off-line discussion about where Grbl is going and what's next:
**chamnit** : This is something I've been thinking about often recently. Is Grbl done? Or have we pushed it abou…
-
There have been a few discussions of organizing the misoc tree. There seem to be two groups of challenges:
## misoc python package namespace
Misoc could probably become a real python package. Then us…
-
I'm trying to run this command,
`python3.5 -m artiq.gateware.targets.kc705 -H qc1 # or qc2`
but get the following error,
```
Traceback (most recent call last):
File "/home/rabi/anaconda3/lib/pyt…
-
Stacktrace from "journalctl -fl" before I lost my ssh connections.
This appears to be a 100% reproducible lockup when I run 'zfs destroy "$snapshot"'.
```
# zfs list -t snapshot | wc -l
269
```
Stac…
-
Only 1 out of 4 CPUs start on branch rpi-4.1.y d9fa1180.
"[bcm2709_boot_secondary] cpu:1 failed to start (9380)"
All CPUs are brought up (same hardware/unit) by latest raspbian.
Is there a known fi…
-
Having an issue-- found it with both 3.14.58 and 4.1.15 so it must be systemic?
Hardware:
Beaglebone black with USB wireless (Novatel USB760).
I'm running a simple script that sends an "AT" to the …