-
### What happened?
trying to stream a v4l2 device (usb-webcam):
ffmpeg -thread_queue_size 512 -i /dev/video1 -thread_queue_size 512 -f alsa -i plughw:CARD='Webcam' -c:v h264_rkmpp -profile:v basel…
-
Reported by ChrisS here: https://www.exxosforum.co.uk/forum/viewtopic.php?p=107764#p107764
Found some issues
1
Because I would like to try the S2 midi module I installed scummvm ST with the Fat…
dh219 updated
2 months ago
-
### Describe the bug
Hardware acceleration doesn't seem to be working on chromium based browsers. I'm using an nvidia gtx 1060 and have tried multiple nvidia drivers but it doesn't help (tried stable…
smufa updated
1 month ago
-
### Describe the bug
23.05.3版本编译的r5s设备固件,两个LAN口其中一个LAN口无法识别,中间的2.5GLAN口无法识别,另外一个可以使用,查询使用的驱动是R8125驱动,什么原因呢?使用[immortalwrt]提供的镜像也是如此。
### ImmortalWrt version
r27917-81a1f98d5b
### ImmortalWrt relea…
-
### Describe the bug
I monitor to UART1 TX without any data when T1 was configured as Smartaudio, but when changed to IRC Tramp kept receiving some data, but I didn't confirm if it was correct or not…
-
hello,
When I run this drive in Dos7.1 on a Intel 430FX or HX chipset I get the following error:
IDE0 Controller at address 6000, I.D. Code 80861230h.
EDD data BAD, unit 80
These chipsets supp…
-
The sequential R/W speeds max out at around 23-24 MB/s with a SanDisk Ultra UHS-I A1 card.
The chip can do much better than this, but it is currently constrained by the following issues:
* DMA is…
-
I tried to use fbcp-ili9341 with my tft display: [https://www.adafruit.com/product/2050](https://www.adafruit.com/product/2050)
that supports controller HX8357D, I did everything the readme page sai…
-
Hi,
Is there/can you provide documentation on how to use the DMA Controller as a target for an AXI4-Stream.
In this case, I am using the DMA controller in Renode. I am streaming data to the AXI4-S…
-
Hello @jbentham
Congratulations for the project that is capable the high speed capture ADC using DMA! That is amazing!
I tested your example `rp_adc_test.py` but I noticed that has something li…