-
care should be taken when considering synchronous resets.
for a synthesis flow where clockgate insertion is required, clockgate enables are derived from the RTL.
Consider the dmactive synchronous re…
-
Anybody managed to use interrupts (double-tap or wrist-tilt) in the low-power mode of BMA423?
-
If the Onyx is in low power mode (switch is up) and a USB cable is plugged in.
The device does not return to low power mode when the cable is removed.
In my opinion, the device should stay in low pow…
-
There are 2000mW VTXs out there now, so it seems wrong to limit VTX_MAX_POWER to 1000.
-
This is a follow-on from #119 which never seems to have adequately resolved.
In addition to getting ~300uA on VDD_MCU when the event loop is idle, I always see ~1mA on VDD_USB. I believe this is …
-
```
Idea for a Low power mode
When a cog begins executing a dictionary search or any word, set a flag
indicating "full power needed"
When a cog finishes executing the word and returns to the quit l…
-
As per ongoing discussion with .org about libraries, here is a proposal for MCU (and companion MCU) standby API
https://github.com/rocketscream/Low-Power is a good starting point, AVR API is too gr…
-
I'm not sure what the right place to discuss this is, so let's try here.
The Debug Spec allows a hart to be unavailable, which can be used by cores where harts can be powered down, or even hot plug…
-
For low slew rates and low quiescent power applications one could make a variant for the PA97. It's almost pin compatible and doesn't need cooling.
-
various docs mention `./twisterd sendnewusertransaction myname` can take some time depending on your CPU. I cannot get past this step with ARM/Raspberry Pi - in the web or cl interface. Is it possible…
oeon updated
10 years ago