-
### Current behaviour
Flight controllers can currently only have a serial connection to the Raspberry Pi via a USB port. This unnecessarily prevents connecting an autopilot via a UART using the GPI…
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
-
I am trying to run gazebo using standard_vtol.world and qgroundcontrol with the HIL standard vtol airframe selected. The aircraft wobbles on takeoff and within 7-30 seconds it gives the errors "Critic…
-
### Describe the bug
The expected behavior of takeoff is not done although the Takeoff command is initiated. I have even assigned the actuators.
### To Reproduce
1. Flash 1.14 rc1
2. Run …
-
### Describe the bug
QGC would get stuck at "loading" in Mainland China.
![image](https://github.com/PX4/PX4-Autopilot/assets/46874772/59a42fe4-f906-4e5d-afa7-8ca00caf47dd)
- The loading would r…
-
I notice that in the case when multiple power bricks present, if the current main power source failed the avionic will reboot.
Here is the test I've made on Pixhawk 5X:
- Hardware setup: Connect Po…
-
### Describe the bug
When in Position mode and there is an offboard controller publishing `VehicleAttitudeSetpoint` commands, you notice interference between the offboard controller commands and th…
-
When connecting to QGC Android and QGC Windows to Pixhawk (PX4) with Bluetooth as a bridge to xBee I get a dropped connection when sending data, such as a switch position change.
Setup is flight co…
-
### Bug report
**Issue details**
While trying to download a lot of logfiles (500 in my case) through Mavlink, the propellers start moving. After checking the oneshot125 signals to the speed contro…
-
Dear Sir
I really appreciate your great effort and your valuable contribution to the UAV field
I was trying to work with Pixhawk 4 (fmu v5). I was able to build and upload the firmware for the examp…