-
## Describe the bug
Following the guide here https://docs.px4.io/main/en/debug/system_wide_replay.html, I get the issue when calling "make px4_sitl none"
"[0/2] Re-checking globbed directories...
n…
-
## Feature request
**Is your feature request related to a problem? Please describe.**
The most critical phase of a non-vectored tailsitter flight is landing.
After the transition in the case of (…
-
## Current Behavior
The optic flow & lidar sensor MTF-01 work well in INAV6.1 and INAV7.0 as the video: https://www.youtube.com/watch?v=bEKm-PGRnks
But when I upgraded the firmware to INAV7.1, the q…
-
Dear Developers,
I am trying to add a new configuration (tilt-rotor tricopter) in the software-in-the-loop package of PX4 Firmware. In the PX4 developer's guide it is mentioned that in order to custo…
-
### Describe problem solved by the proposed feature
Since a while now we have the strict rule that in Stabilized mode, the user directly sets the attitude and collective thrust, and the controller is…
-
## Current Behavior
Recently a [fix](https://github.com/iNavFlight/inav/issues/8080) was made for the [Matek GNSS M8Q-CAN](http://www.mateksys.com/?portfolio=m8q-can) gps, the barometer was not d…
-
minimum viable 3B:
----------
- [x] UAVCAN airspeed #3074
- [x] hanging rm3100 #3080
- [x] multi imu sending #3084
- [x] mavlink camera control #3085
- [x] moving target gains in airframe #3086
…
-
## Bug report
Nearly two years ago I posted about **RevoMini with I2C and SD card supported**
in the forum.
https://discuss.ardupilot.org/t/revomini-with-i2c-and-sd-card-supported/89676
Now…
ghost updated
8 months ago
-
I run the command make "px4_sitl jmavsim", it failing and giving below error I tried all solution on the internet nothing worked.
-
Hello,
On folowing the instructions in the README, the docker build command fails halfway through. Here is the terminal output of what is happening. The error message is at the end of the code bloc…