-
I am trying to build libCVD in order to use with ROS node tum_ardrone.
I am working on a 64 bit Ubuntu machine if this matters.
My Problem is that I am getting the following errors:
make[3]: Enteri…
-
締切り 10/28 まで
-
Hello,
I'm working with the ARDrone 2.0 and I would like to know whether it's possible to configure tum_ardrone package to use with downward camera (Actually I did some modification on the drone and …
-
Hello,
In the tum ardrone package, it is possible to occlude the camera with the hand and the algorithm has the capability of recovering from the loss of tracking, which was caused by the occlusion. …
-
The problem with AR.Drone is
when i give a command of linear.x = +1 for 2 seconds and then making it zero. When, i repeat this as a sequence of 10, AR.Drone is getting out of track i.e., its angular.z…
-
My problem is:
i want to move ardrone forward for 2 seconds and then stop. So, i can make it move forward by making linear.x +=1 and then so but how to make it for 2 seconds and then stop.
I tried us…
-
root@assad-Studio-1558:~/catkin_ws# catkin_make
Base path: /home/assad/catkin_ws
Source space: /home/assad/catkin_ws/src
Build space: /home/assad/catkin_ws/build
Devel space: /home/assad/catkin_ws/dev…
-
When I try to build the simulator, I get the following error,
[ 93%] Built target hector_gazebo_quadrotor_simple_controller
fatal: unable to connect to github.com:
github.com[0: 192.30.252.129]: errn…
-
I get the following messages when I launch the driver (roslaunch ardrone_autonomy ardrone.launch):
``` bash
... logging to /home/gcn/.ros/log/9b5be772-074e-11e4-a84f-94dbc99d5609/roslaunch-gcn-K53E-…
-
For some reason I am unable to fly either of my drones with the indoor or outdoor frame on the robot. The only way I can get it off the ground reliably is to fly the drone with out any of the covers o…