-
Hi everyone,
My quad was working very well with inav 1.7.2 : rth, poshold, waypoint. During winter I let him away due to bad weather.
Since I get it back I have some problem with Gps Mode : Pos…
ValCx updated
5 years ago
-
PX4 1.7.3
QGC 3.3
Joystick: Mad Catz F.L.Y.5
Flying Wing. (VTOL)
When you arm in Virtual RC by Joystick mode and you have your RC switched on there is no way you can control the plane because th…
-
### Board and Version
Matek F405-WING
INAV 2.0.0 - `development` branch
INAV/MATEKF405SE 2.0.0 Jun 19 2018 / 18:46:07 (d57136b)
This is my built from my working fork at https://github.com/au…
-
PX4 1.7.3
QGC 3.3
Joystick: Mad Catz F.L.Y.5
Flying Wing. (VTOL)
When Joystick/ No RC Checks is used. After arming with the button, and then arm with joystick switch i receive the following erro…
-
Hi, the reading of the barometer gives nothing, but it is coming at what seems to be a normal rate.
The message in ROS looks like this, but is stuck on the same value always:
```
header:
seq:…
-
I connect omnibus f4 pro with sbus + softserial telemetry on CH5 CH6 pad.
30 min ago, same hardware setup, in iNav 1.9.1, the softserial telemetry is working, I will post 1.9.1 diff on the second pos…
-
## Problem
I configure this board in uart5 to control Runcam Split Mini.
But i cant start and stop record.
I use channel 10 to control CAMERA POWER, i dont use CAMERA CHANGE MODE and CAMERA WIFI.…
-
Hello my friends, i use airbot f4
Pwm 1-4 is active i use wing in inav.
In pwm 5 i wont use servo for my camera fpv. So i can turn around. But pwm 5 not active.
Uart 1 i use gps
Uart 6 for sbu…
-
#### Issue details
I've checked that RC Inputs match the RC Inputs documentation, using a TBS Crossfire via Telemetry Port via a TBS Tango set to APM Mode. Pitch is inverted in RC Setup for plane.
…
-
We don't have access to source inversion for servo mixer inputs.
![image](https://cloud.githubusercontent.com/assets/11059099/23831916/1f26a478-0776-11e7-9f79-9d852f331590.png)
I suggest replaci…