-
Hello,
I've also started with some hoverboard hacks, here are my projects:
https://github.com/tyler123durden/hoverboard-hardware
https://developer.mbed.org/users/Thomas_H/code/HoverboardTest/
…
-
### Description of the failure
I suspect that the right upper leg FT sensor (EB8) is broken.
### Detailed conditions and logs of the failure
The robot fell, and then it started complaining about FT …
-
The Magnetometer calibration relies on the rotation around all axes. It's easy to miss a needed point during calibration.
There is an application note which fits a sphere to data points, and using i…
-
Attempt to include SeaExplorer gliders in the toolbox.
Modifications to the toolbox would include functions such as:
- loadSeaexplorerData.m
- sx2mat.m
- sxcat.m
- sxmerge.m
Please refer any suggesti…
-
Hello, I have 4 analog sensors namely, stainless steel temp, DO probe, pH probe and Ammonium Ion-Selective Electrode. I have two sparkfun arduino board. Now since the vernier interface shield has only…
-
Currently, the only Dexcom vendor/device functions available are
`glucose`
`iter_glucose`
`iter_glucose_hours`
which all obtain glucose values, trend arrow direction, system times, and display times…
-
This was requested as part of AC3.2 testing.
http://diydrones.com/forum/topics/arducopter-3-2-beta-testing?xg_source=msg_com_forum&id=705844%3ATopic%3A1656303&page=112#comments
There are two risks fo…
-
Sometimes sensors are sending wrong data (non-calibrated sensors, different measurement range, etc) so adding an offset field to sensor edit form would be great. for example, I have a sensor that I kn…
-
Flashed current master d1b27ab056d35f695b33d1a021d8900a4d69ba61 to my pixracer.
When I plug in the USB cable it boots up already armed. If I disarm from QGC I get the following warning message: "Avion…
-
I had successful flight with tag v1.4.1rc1 logs [here](http://logs.uaventure.com/view/DzRQoowFfGX5HzUae966nJ#_PLOT) (intensive wind conditions)
But when I switched to tag v1.4.1rc2 or master (at toda…