-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
```
What steps will reproduce the problem?
1. No overlay at all
2. video is ok from GoPro
3.
What is the expected output? What do you see instead?
I am only getting video from OSD. No overlay whatso…
-
https://github.com/marketplace/imgbot
@mhkabir Thanks for link above. I'm in two minds about automating image compression. Obviously smaller files makes things better for end users. My concern is …
-
The value of ARSPD_BUS parameter does not change anything :
Tested with mRo I2C Digital Airspeed Sensor MS4525DO
ARSPD_BUS =0, 1 or 2 : the Airspeed Sensor is always detected
Tested on the 3…
-
**Describe the bug**
This issue is a direct follow-up, but separate issue from [this issue](https://github.com/PX4/PX4-Autopilot/issues/19231).
The previous issue was a serial freezing problem whi…
-
[Cartographer SLAM for Non-GPS Navigation](https://ardupilot.org/dev/docs/ros-cartographer-slam.html) - Describe the issue/suggestion and improve the title. Please keep a link to the original article …
-
I thought I raised this issue before but I can't find it on the list.
DroidPlanner gets confused when there's multiple vehicles or multiple components sending a heart-beat (and perhaps other) message…
-
On Main when RC RSSI is plugged in it doesn't always get picked up and displayed. Multiple reboots were needed to get it picked up.
Tested a known setup on a Pixhawk 4
@dagar explained that it i…
-
#### Issue details
In every flight ,at start I see one more CAM, than expected.
Screenshot shows first TRIG (line 210835), then 21ms after that, a CAM log (too fast to be the actual camera.... THEN…
AndKe updated
7 years ago