-
```
I thought I'd respond to:
https://code.google.com/p/nxt-python/issues/detail?id=18
As I have such hardware.
First run: http://sprunge.us/FRJI (motor controller first in chain) (set_power
worke…
-
I would like to use it with DRV8825 or with an A4988.
Thanks so much for the software
-
For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
**Describe problem solved by the proposed feature**
I am using…
-
It would be nice if the Board comes without Motor driver only with Connectors for the Driver.
Maybe like this:
- MotorDIR
- MotorBREAK
- MotorPWM
- MotorEnable
- MotorSpeed
- MotorFault
-
This issue has been driving me crazy. I have a single driver board with an esp32 and seem to be having some weird behavior. Here is my schematic (sorry for the awful layout, I usually have time to do …
-
our favorite ST chip is dual-channel right? let's wire both channels to just large pads for now
-
Is it possible to apply hector navigation to a robot with motor driver(L298N)
-
I have been reading up on transistors vs. MOSFETs for motor drivers. As a general rule of thumb, you need a driver that can handle 3-4 times your actual load(1). This is especially the case for a DC m…
-
Ordered for testing:
**Drivers:**
[A4988](https://www.amazon.com/gp/product/B07BND65C8/)
[TMC2209 V1.3](https://www.amazon.com/gp/product/B07ZPYKL46/)
[DM556](https://www.amazon.com/gp/product/B…
-
Hello,
1)The wifi will not work for me. I can only connect by ethernet cable
and this does not work all of the time.
2) The motor drivers are very loud and noisy. Whenever the motors are
active th…