-
I have installed jazzy on Raspberry Pi 4 (Raspberry Pi OS Bookworm 64 bit). When I launch rviz2 I get this error:
`[rviz2]: rviz::RenderSystem: error creating render window: RenderingAPIException: In…
-
All the meshes are getting exported in meshes folder while the urdf file has only base_link. It only opens base_link in rviz then.
-
I have setup an ackerman controller based on the demo's mentioned in the repo - https://github.com/ros-controls/gz_ros2_control/tree/master.
The controller is used in non chained mode. I have setup…
-
Hi. I run the algorithm on ROS2 with my recorded ros bag file from Carla (Velodyne LiDAR.) I have the IMU noise values from the imu_utils package and it seems right. However, to test it on the lio_sam…
-
运行roslaunch unitree_move_base rvizMoveBase.launch 后,出现了这样的问题:
![Snipaste_2024-08-08_09-49-39](https://github.com/user-attachments/assets/1e7f4a5e-48c2-43c1-aa7a-84176db6baa3)
模型显示不全,且rviz界面报错,命令行也报错…
-
Hiii
Thank you so much for this awesome work, it has helped way more than any support the opi software provides!
I am trying to run a pyqt application which uses [RVIZ](https://github.com/ros-visu…
-
I have followed the steps on the github but i still get this error any ideas how to fix. Running ROS2 Foxy on the jetson nano. Ubuntu 20.04.
![Screenshot from 2023-12-07 14-38-29](https://github.com/…
-
when i roslaunch lio_sam run.launch in docker, it could not open the rviz, and it shows
![bug](https://github.com/TixiaoShan/LIO-SAM/assets/168325524/86b5b32a-86b5-4fee-a1d7-ac4232f17752)
-
Thanks for your good work!
I encountered a problem.
When I press ctrl+shift+R, rviz has a display problem. And Gazebo is all right.
Could you please tell me how to solve this problem?
![Screenshot…
-
WARN] [1718723053.486038178]: Pose 'Pose' contains unnormalized quaternions. This warning will only be output once but may be true for others; enable DEBUG messages for ros.rviz.quaternions to see mo…