-
While testing the v1.6.5 of the PX4 Firmware I discovered that in the stabilized mode the manual overwrite is not allowed:
https://github.com/PX4/Firmware/blob/master/src/modules/commander/commander.…
-
#### Issue details
_Please describe the problem, or desired feature_
This is data f…
-
I have an SP Racing F3, most likely a clone. I have been fighting a GPS issue for a couple of weeks. I have tried 3 different SP Racing F3 boards and 3 different GPS units with similar results. Here…
-
### Board and Version
_Mactec f405std
_Inav 1.9_
### Behavior
* I can fly around in various modes, manual, pass through, positon hold and rtl all work as intended.
After a short flight sa…
-
@RomanBapst Could you please have a look at this log file?
https://review.px4.io/plot_app?log=6fa2399a-ccb4-4a2d-8303-091dec28dda0
@PX4/testflights You can tag Roman for future issues directly.
-
Board : Omnibus F4 V3
Version : INAV 1.8.0
INAV/OMNIBUSF4V3 1.8.0 Nov 1 2017 / 06:35:50 (912d1315)
### Behavior
* On the ground, Plane's control surfaces move enough, same amount as previous …
-
Hi,
First of all, i have used this code in the Qualcomm_Snapdragon_Flight.
Now, i have tried to use two sets of code. One of them is this PX4/Firmware. However, the ESC can't working when i use th…
-
### If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.
### Please consider using other user support options such as asking the manufacturer of th…
-
Hi!
Trying to port Prototype to amigaos4 via gl4es, and , have some issues on linking stage. While all objects compiles fine, i can't have final binary, as it give me conflicts with libgl4es.a:
…
kas1e updated
5 years ago
-
Follow up from #4438
In 1.6.3 the FLAPS are operational but there are still some concerns about the flaps behavior.
In manual modes the flaps extends full way.
In guided modes ie. Altitude a…