-
I use 3dm-gx5-25 connect ubuntu ok, but I can't find ttyACM* device
-
It is possible to install a magnetometer on a pixhawk facing the wrong direction. If you then complete all the checks, it will pass prearm, and will fly ok in Stabilise. Unfortunately when you switc…
-
Suggested by esa: I would therefore recommend that you create software that exercise the operational capabilities on Astro Pi and CalliopEO in a tight controlled loop;
- On the Astro Pi mark II; just…
-
I am getting the following error and invalid value of yaw-
mag precise is claibrating
/home/pi/.pyenv/versions/instalimb/lib/python3.8/site-packages/imusensor/MPU9250/MPU9250.py:400: RuntimeWarnin…
-
**Describe the bug**
A clear and concise description of what the bug is.
**Device information:**
- OS: container based on Jetpack 4.4
- CPU: Jetson Xavier NX
- GPU Nvidia: Jetson Xavier NX
…
-
### Describe the bug
The OSD is very slow to update, taking 25 sec to clear the startup screen with block-like display or clearing. OSD elements are displayed a few characters per second. For …
-
### Describe the bug
The OSD is very slow to update, taking 25 sec to clear the startup screen with block-like display or clearing. OSD elements are displayed a few characters per second. For e…
-
In the MPU6050_6Axis_MotionApps20.h cause the quaternion to initialized in the power up direction. In other words the axis system of the wold frame depends on the power up orientation of the sensor. T…
-
### Describe the bug
### To Reproduce
### Expected behavior
### Flight controller configuration
```
PASTE THE OUTPUT OF 'diff' HERE
# diff
# version
# Betaflight / STM32F41…
-
### Bug report
**Issue details**
This config:
COMPASS_AUTO_ROT,1
COMPASS_CAL_FIT,32
COMPASS_DEC,0.15431185
COMPASS_DEV_ID,466441
COMPASS_DEV_ID2,466433
COMPASS_DEV_ID3,131874
COMPASS_EXTE…
AndKe updated
3 years ago