-
### Controller Board
6-pack
### Machine Description
Ultimate Bee 4. 3 nm stepper motors with feedback using Normaly open 5vc 4mm detection proximity sensors
VFD spindle
### Input Circuits
_No re…
-
Hi
Possible to have an option to specify number of passes aka redo the CNC job N times ?
Regards
-
### Version
Other
### Hardware / Firmware
GRBL 1.1
### What happened
Joystick settings are not transferred to new version even when all config files are manually copied.
I'm sure it's related …
-
### Wiki Search Terms
lightburn, M4, inline, Uart, RMT, RTM, i2s_static
### Controller Board
Jackpot
### Machine Description
MPCNC, Dual X, Dual Y, Single Z
TMC 2209, New UART code
### Input Ci…
-
So the current level of support in lasers on other platforms is superb.
Grbl 1.1e has beautiful support for G0=travel moves=beam off, and G1=cut move =beam on
Smoothieware has the same method, w…
-
### Version
2.0.12
### Hardware / Firmware
GRBL 1.1
### What happened
The svg file "[Test.svg](https://user-images.githubusercontent.com/8106470/202260360-b0b6993d-41ea-4992-b2ff-cbf55f10479e.svg…
-
### Version
2.0.13
### Hardware / Firmware
GRBL 1.1
### What happened
Both 2.0.13 and the latest nightly are not bringing across my visualiser and joystick settings from 2.0.12.
Window positions…
-
### Controller Board
2 Axis pen/Laser
### Machine Description
2 Axis pen/Laser with a4988 driver
### Input Circuits
```yaml
for input pin I just put a push button for "macro0_pin: gpio…
-
In the version 2.0.40 under "Settings: Grbl", there used to be text under the tick boxes explaining what the various settings did. In the current version 2.0.42, that text has disappeared.
It would…
-
Hi there,
I want my rotary axis only (not linear axis) ignore limit switch when working, and use limit switch for homing only. Is there any setup for that?