-
When attempting to Flash a Kakute F7 AIO with a Chibios Developer build the only Board Type that shows in the drop down is for Skyviper.
-
While testing Copter-4.1.0 I've noticed that at least sometimes the firmware version is not displayed in the ground station's messages window. This makes it difficult to know which version is on the …
-
Direct from YOW LambdaJam 21!
Fault tolerant, concurrent, distributed and functional with superior binary wrangling capabilities and network/device connectivity - the Erlang platform designed to ru…
-
## Expected Behavior
I would like to just be able to build QGC and run it, so I can do development.
I use these steps:
```
mkdir build && cd build
~/Qt/5.12.9/gcc_64/bin/qmake -r ../qgroundcontro…
-
Hello.
I have the DroneBridge running on an ESP32 that is connected to Telem1 of CubeOrange.
I have changed the BAUD_RATE on DroneBrigde and on GCS to 115200.
I have connected to DroneBridge …
-
Need to port scripts to python3 and ros2.
Also would use single entry point.
vooon updated
3 years ago
-
## Current Behavior
Connecting to QGroundControl over serial or UDP (with Crossfire) results in the following logs in QGroundControl:
```
Switching outbound to mavlink 2.0 due to incoming mavli…
-
## Bug report
**Issue details**
Error when building with
```
waf configure --board sitl
waf copter
```
**Version**
ardupilot 4.0.7
mavlink 0ef4d3f3728249831228ea9155e48b0248699bb3
**Lo…
-
Hello,
I am following the [ubuntu dev install](https://docs.px4.io/master/en/dev_setup/dev_env_linux_ubuntu.html#gazebo-jmavsim-and-nuttx-pixhawk-targets) and [gazebo sim setup](https://docs.px4.io…
-
## Question
### What's your question?
### Include context on what you are trying to achieve
#### Context details
### Include details of what you already did to find answe…