-
### Is your feature request related to a problem?
I use your Cura Slicer 4.91 to send the print file from the computer to the 3D printer. The Jog position in the Cura Slicer monitor screen is disable…
-
I'm Mark, the creator of Blur Busters and TestUFO.
I noticed you have a virtual display driver capable of custom refresh rates -- maybe you want to make minor modifications to meet an existing B…
-
_**NOTE:** If you've come here via a social media link, this thread is part of FCP Cafe's Bug Tracker._
_You can learn more here: https://fcp.cafe/bugtracker/_
---
**FINAL CUT PRO 10.6.8 IS O…
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
Hi Kris, I have been trying to make my LSM9DS1 with your code. I just have a few questions.
I am using madwick filter on an arduino uno.
`MadgwickQuaternionUpdate(ax, ay, az, gx * PI / 180.0f, gy …
ghost updated
7 years ago
-
Presumably the Extrusion Width for bridging should be equal to or less than the width of the hot end nozzle. This would allow the bridge to be created without gaps and be self supporting. The curren…
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
Hi, all!
I have problem with configuring Repetier firmware for such configurations.
I've set pins properly, and created Configuration.h, but it ignores motion on X,
puts motion on Y to X axis motor dr…
-
### Describe the project you are working on
Networked player movement with client-side prediction
### Describe the problem or limitation you are having in your project
Quick summary of cl…
-
`recording_cmr = si.common_reference(raw_rec, reference='global', operator='median', dtype='float32') `
`recording_f = si.bandpass_filter(recording_cmr, freq_min=filting['freq_min'], freq_max=6000, d…