-
I'm a pretty new user of Grove modules. I have successfully run 16x2 LCD and ultrasonic ranger with that Python library but I can't run IMU9DOFICM20600 (gyro/accelerometer/compass) with it.
What I …
-
- [ ] Using the simple accelerometer and gyrometer.
- [ ] Using the accelerometer to turn the bot right.
-
I'm only getting 1.3V when I check the voltage of the ground and 5V pin. I'm attempting to power and read a 9DOF BNO055 IMU with the M5NanoC6, but on both boards, when I check the outut voltage it rem…
-
I'm attempting to hook an Android OS device to a GPS 9DoF IMU that is external to the device on a wired network (USB-to-Ethernet adapter that can also charge the phone/tablet). Basically I want to fe…
-
I've followed the direction very carefully. The Arduino sketch runs fine, but when I try to run the "Processing" sketch, I get the following messages, and nothing appears in the Razor_AHRS_test graphi…
-
-
This will be hard because hardware i2c can't be used due to a RPi hardware limitation regarding i2c clock stretching.
Possible options:
- Use software i2c: undesirable because it will eat up CPU…
-
```
Hello,
I have the new 9DOF atomic imu and I am having a bit of trouble reading
data from it. The installed sketch ran fine and I could read the data no
problem, but I downloaded the AHRS code …
-
Hi,
I'm trying to use your lib with this board because the code given by the reseller is not working correctly.
I'm just starting arduino for this application and it is not as easy as I thought.
Do…
-
- [ ] Develop a module for inertial navigation that uses sensor data (accelerometer, gyroscope) to maintain spatial orientation and determine position.
- [ ] Integrate this module with the existing c…